Excavator Operator NZ Assessment - AlphaCon Solutions

Excavator Operator NZ

Complete Payment to Access Assessment

This assessment requires payment before you can begin.

📋 Have a Voucher Code?

💳 Pay Now

Single Test

NZ$57.50

Per test

inc GST

Bundle of 5

NZ$250.00

NZ$50.00 per test

inc GST

Save 13%

Bundle of 10

NZ$450.00

NZ$45.00 per test

inc GST

Save 22%

Bundle of 20

NZ$800.00

NZ$40.00 per test

inc GST

Save 30%

🛡️ Secure Payment - All payments processed securely by Stripe

📧 Instant Access - Begin assessment immediately after payment

💰 Bundles - Get voucher codes to share with team members

Time Remaining: 2700

Instructions: Answer all questions to the best of your ability. Your responses will be reviewed and scored.

Your Information

Full Name *

Email Address *

Question 1

Describe reading earthworks drawings for excavation boundaries.

Question 2
MC Timer: 45s

Who approves work resumption after utility strike?

A. Operator B. Site supervisor/engineer C. Spotter D. Safety officer

Question 3
MC Timer: 45s

Why do operators use spotters?

A. To operate controls B. Provide visual guidance and safety C. Record production D. Direct traffic

Question 4
MC Timer: 45s

What does \\\"final trim\\\" mean?

A. Rough excavation B. Precise finishing to required levels and shape C. Clearing vegetation D. Demolishing existing structures

Question 5
MC Timer: 45s

What should be completed before operating a machine each day?

A. Cleaning the cab B. A pre-start inspection C. Refuelling only D. Paperwork

Question 6
MC Timer: 45s

What signals poor ground conditions?

A. Dry smooth cutting B. Excessive water, collapse, odour C. Normal digging speed D. Consistent material

Question 7
MC Timer: 45s

What is compaction testing used for?

A. Checking moisture content B. Verifying soil density meets specifications C. Measuring excavation volume D. Testing water quality

Question 8
MC Timer: 45s

Which document shows excavation levels and boundaries?

A. Safety data sheet B. Earthworks plan C. Equipment manual D. Timesheet

Question 9
MC Timer: 45s

What does \\\"cut and fill\\\" refer to?

A. Trimming edges B. Excavating high areas, filling low areas C. Final grading D. Stockpile management

Question 10

How do you communicate with other site workers while operating?

Question 11
MC Timer: 45s

What is the first step before starting excavation?

A. Dial Before You Dig B. Fuel up machine C. Check weather D. Call surveyor

Question 12
MC Timer: 45s

What is the safest action if instructions are unclear?

A. Guess and continue B. Stop work and clarify C. Ask another operator D. Complete as much as possible

Question 13
MC Timer: 45s

Why is machine control or GPS technology used?

A. To increase engine power B. To improve accuracy and efficiency C. To reduce machine size D. To eliminate manual skills

Question 14
MC Timer: 45s

What does working unsupervised require?

A. Ignoring procedures B. High responsibility and self-management C. No communication D. Working alone at all times

Question 15

What steps follow after completing bulk earthworks cut to level?

Question 16

How do you verify completed earthworks meet specifications?

Question 17
MC Timer: 45s

What are bulk earthworks?

A. Manual digging B. Large-scale soil movement C. Final surface finishing D. Concrete placement

Question 18

Describe SWMS implementation on excavation site.

Question 19

Explain stockpiling excavated material safely.

Question 20
MC Timer: 45s

Which hazard requires immediate stoppage?

A. Small stone B. Underground gas main hit C. Rain starting D. End of shift

Question 21

What are requirements for working in excavation deeper than 1.5m?

Question 22
MC Timer: 45s

What is reinstatement?

A. Machine maintenance B. Restoring excavated areas to a safe condition C. Survey work D. Drain testing

Question 23
MC Timer: 45s

What is \\\"proof rolling\\\"?

A. Final compaction B. Testing subgrade with roller for soft spots C. Surface sealing D. Moisture testing

Question 24
MC Timer: 45s

When should you use the excavator bucket as a work platform?

A. Always for access B. Never - use proper access equipment C. Only for light loads D. During final trim only

Question 25

Explain safe trenching procedures near existing utilities.

Question 26
MC Timer: 45s

What is the purpose of silt fences?

A. Wind protection B. Sediment control C. Noise reduction D. Privacy screening

Question 27

Explain recognising and responding to changing ground conditions.

Question 28
MC Timer: 45s

What does SWMS stand for on site?

A. Safety Work Method Statement B. Site Work Management System C. Standard Work Materials Schedule D. Safety Warning Management Service

Question 29
MC Timer: 45s

What must be checked before digging near overhead power lines?

A. Weather forecast B. Safe working distance C. Fuel levels D. Tyre pressure

Question 30

What are key safety requirements for working near overhead power?